So i made this Open source Board, With three separate switching regulator for each bank VCCIO on 4 Layer Gold finish board with most of microZed pins broken out in LVDS pair. PCB is 4 Layer impedance control for 100R LVDS pair. Board has 3 solder jumpers per regulator to change bank voltage of each bank separately.
There is not much in schematic , only few switching regulator for all Bank Voltage and IO headers .
PCB Gerber , Source and Schematic PDF available at github
Hey, do you have any plans to implement the previous mipi camera project to xilinx platform?ReplyDelete
Yes, That is exactly what i am working on right now. New raspberry PI camera MIPI CSI-2 interface to Xilinx FPGA is coming in just few weeks.Delete
Any update on this project?ReplyDelete
A big MIPI Receiver Project is coming up with Crosslink NXDelete
do you sell this board blank or assembled?ReplyDelete