Embedded Engineering
Monday, August 14, 2023
HP Agilent Infiniium 54815A 500Mhz Boot Repair and SSD Upgrade
›
This post is going to be about Repair of old HP Infiniium 54815A 500Mhz oscilloscope. Scope has normal PC motherboard with Windows 98. Sco...
Saturday, May 27, 2023
Agilent Keysight 1152A Active Probe Autoprobe Smart Probe, Probe ID Mod Patch
›
This Post is going to be about modifying Agilent/HP 1152A active probe to be able to support 5V input and Smart Probe ID. 1152A Active Pro...
Sunday, June 12, 2022
Making Opensource USB C industrial camera with Interchangeable C mount lens, Interchangeable MIPI Sensor with Lattice Crosslink NX FPGA and Cypress FX3 USB 3.0 controller
›
This post is going yet another part in the DIY camera projects which have been doing since quite some time. In this post I will showi...
71 comments:
Thursday, May 19, 2022
USB 3.0 Camera board with Cypress FX3 CYUSB3014 and Lattice FPGA CrossLink NX LIFCL-40 Prototype
›
From quite some time i have been working with different MIPI CSI Camera Solutions , Interfacing Camera with FPGA and Connecting to USB 3.0...
Wednesday, May 18, 2022
Agilent Keysight 53220A Universal Frequency Counter Option 010 Ultra High Stability OCXO Timebase Upgrade
›
I have previously upgraded Timebase for Agilent/HP 53132A Universal frequency counter and also PM66xx Counter. This time i will be upgradin...
DIY Fluke Philips PM66xx OCXO 10MHz Oven Oscillator option board for PM6680B PM6681
›
Quite a while ago I had written about how I upgraded oscillator of my Agilent/HP 53132A. I have recently bought a broken Fluke/Philips PM66...
Saturday, May 2, 2020
DIY Open Source MicroZed Breakout Carrier Board For MicroZed Zynq FPGA SOM board
›
For new FPGA SoC related project, and i will be using Avnet MicroZed Zync SOM board. But Avnet microZed Board has two 100 Pin fine pitch con...
5 comments:
Sunday, February 16, 2020
Opens Source IMX219 Camera MIPI CSI-2 Receiver Verilog HDL Lattice FPGA MachXO3 Raspberry PI Camera
›
This post is going to be yet another part of the previous camera projects published on this blog. As described in the last post here in whi...
22 comments:
Saturday, February 15, 2020
DIY IMX219 4 Lane MIPI CSI Breakout Board, Getting MIPI CSI 4 Lane From Raspberry PI Camera
›
I have published many post in which i have been interfacing various cameras sensors/modules to different processors. This post is also going...
25 comments:
Friday, February 7, 2020
DIY USB 3.0 1080p Full HD Camera with Auto Focus and 10x Optical zoom, 1Gbps Streaming Over Cypress FX3 USB3.0
›
This Project is also going to be next in the series of post i made about interfacing various camera modules to processors and Over to USB. ...
3 comments:
›
Home
View web version